Electronic Power
Electronic Dielectric Protector


Forms a long term protective coating for rigid and flexible circuit boards. This one-part & self-priming coating cures to a flexible & transparent elastoplastic coating ideally suited for electronic printed wiring board applications.

Characteristics and benefits

Electronic Power provides environmental and mechanical protection to extend the life of electronic components and circuitries. It combines the following benefits:

Protects against moisture and contaminants, preventing short circuits and corrosion of conductors and solder joints. Minimizes dendritic growth and the electromigration of metal between conductors. Coats to provide excellent abrasion & solvent resistance.

Types of applications

  • Porous substrates
  • Printed circuit boards.
  • Thick Film circuitry

Directions for use

Application may be done by dipping, spraying and flow coating on a clean & dry surface. The carrier will then evaporate and active component will cure. At room temperature, an active film thickness of (125 µm) will need around 7 minutes for a tack free surface and around 60 minutes to completely cured surface. Use of heat will accelerate curing rate.


Cut electricity before applying. Apply on clean and dry parts. Keep the container well closed. It contains flammable solvent. Use in a well-ventilated area away from open flame.

Available sizes

Aerosol 350gr

Product Number

# 783



characteristics astm test typical values
Dielectric breakdown D877 15,8 kv/mm
Pour point D97 <-420C
Specific gravity at 15oC D4052 0,69 gr/cm3
Viscosity at 40oC D445 0,6 cSt
Color D1500 <0,5