PRO-3 SERIES
100% synthetic oil (group III) for 4 strokes engines

Description
PRO-3 SERIES 100% synthetic Group III engine oils with antifriction treatment are high performance lubricants including the unique formula exclusive to PROLAB, which provide them unique properties that allow to outperform all mineral oils and semi-synthetic on the market.
Features and benefits
PRO-3 SERIES 100% synthetic Group III engine oils with antifriction treatment are based on the most advanced research in the field of the 4-strokes engine lubrication at this time. They were formulated from synthetic base oils and premium additives including the unique single PROLAB FRICTION TREATMENT. Tested in ultramodern laboratory and proven in the toughest conditions, PRO-3 SERIES 100% synthetic Group III engine oils showed the following features:
- They surpass industry standards by providing superior resistance to contamination, oxidation and accumulation of sludge, gum and varnish which gives the oil a longer service life;
- The addition of anti-friction treatment ensures a smooth operation and unsurpassed excellent protection against wear, which helps fuel economy;
- Their very low pour point and high viscosity index makes them very reliable oils, excellent for cold starting, stable against viscosity and help prevent thermal breakdown;
PRO-3 SERIES 100% synthetic Group III engine oils with antifriction treatment are:
- Superior to synthetic oils, they outperform their exceptional characteristics of resistance to extreme pressures and their extraordinary stability against contaminants;
- Better than semi- synthetic oils, due to the exceptional quality of the base oils and additives that compose them. PRO-3 provides longer service life (with a potential of 12 000 km depending on operation).
Applications
Use synthetic oils with antifriction treatment group III SERIES PRO -3 in all 4-stroke engines. Refer to the table for their respective gasoline and diesel applications.
safety data sheet 0w20 safety data sheet 5w20 safety data sheet 5w30 SAFETY DATA SHEET 5w40 safety data sheet 10w30 safety data sheet 15w40
Instructions
Replace the conventional engine oil for PRO-3 SERIES 100% synthetic Group III engine oils with antifriction treatment for your vehicle. For best performance, change the oil filter. For engines with between 40, 000 km and 80, 000 km , use previously the Decontaminant motor DM-30 PROLAB (see product data sheet) .
Follow the manufacturer's recommendations for the right grade.
Notes
Top quality PRO-3 SERIES 100% synthetic Group III engine oils with antifriction treatment allow you to decrease the frequency of your drain intervals. However, it is recommended to consult your mechanic and to check the condition of the oil as the oil filter.
Warning
PRO-3 SERIES 100% synthetic Group III engine oils with antifriction treatment are not designed to repair mechanical defects.
Available sizes
1L, 4L, 5L, 20L, 55L, 205L
Product code
#504 PRO-3 0W20#526: PRO-3 5W20#514: PRO-3 5W30#503: PRO-3 5W40#530: PRO-3 10W30#529: PRO-3 15W40caracteristics | astm test | typical values pro-3, 5W20 | typical values pro-3, 5W30 | typical values pro-3, 10W30 |
---|---|---|---|---|
Type of engines |
Gasoline | Gasoline | Gasoline | |
SAE grades / API Normes | 5W20/GF-5/SN | 5W30/GF-5/SN | 10W30/GF-5/SN | |
Flash point | D92 | 238oC | 224oC | 228oC |
Pour point | D97 | -41oC | -39oC | -38oC |
Density at 15oC | D4052 | 0,8483 g/cm3 | 0,8447 g/cm3 | 0,8800 g/cm3 |
Viscosity at 40oC | D445 | 46,36 cSt | 55,1 cSt | 78 cSt |
Viscosity at 100oC | D445 | 8,48 cSt | 10,4 cSt | 11,8 cSt |
Viscosity index | D2270 | 161 | 181 | 145 |
Pumping viscosity w/o yield stress | D4684 | 12,300 cP (-35oC) | 12,100 cP (-35oC) | 19,200 cP (-30oC) |
Cranking viscosity | D5293 | 3,186 cP (-30oC) | 4,201 cP (-30oC) | 3,500 cP (-25oC) |
High shear high rate kinematic viscosity at 150oC | D4683 | 2,67 cP | 3,04 cP | 3,3 cP |
4-ball wear | D4172 | 0,37 mm | 0,35 mm | 0,33 mm |
caracteristics | astm test | typical values pro-3, 15W40 | typical values pro-3, 5w40 | typical values pro-3, 0W20 |
---|---|---|---|---|
Types of engine |
Diesel | Diesel | Gasoline | |
Grade SAE / Norme API | 15W40/CJ-4/SM | 5W40/CJ-4/SM | 0W20/GF-5/SN | |
Flash point | D92 | 238oC | 210oC | 232oC |
Pour point | D97 | -36oC | -41oC | -43oC |
Density at 15oC | D4052 | 0,8651 g/cm3 | 0,8607 g/cm3 | 0,8700 g/cm3 |
Viscosity at 40oC | D445 | 97,36 cSt | 83,74 cSt | 47,22 cSt |
Viscosity at 100oC | D445 | 14,09 cSt | 13,22 cSt | 8,27 cSt |
Viscosity index | D2270 | 148 | 159 | 151 |
Pumping viscosity w/o yield stress | D4684 | n.d. | 22,500 cP (-35oC) | 25,400 cP (-40oC) |
Cranking viscosity | D5293 | 6,700 cP (-20oC) | 5,425 cP (-30oC) | 6,050 cP (-35oC) |
High shear high rate kinematic viscosity at 150oC | D4683 | 4,2 cP | 3,93 cP | 2,73 cP |
4-ball wear | D4172 | 0,441 mm | 0,490 mm | 0,353 mm |