DM-30
Engine decontaminant

Description

The DM-30 engine decontaminant is a concentrated formula designed to chemically cleanse the valve train, the lifters and the rings.

Characteristics and Benefits

The DM-30 engine decontaminant dissolves varnish, gum, carbon and dirt which adhere to engine parts; it holds these debris in suspension until they are drained away with the oil change.

Thus, DM-30 helps restore compression and bring back smooth engine performance.

Safe for end-user : mild odour, high flash point. Does not contain heavy metals, no chlorinated solvent.

Types of Application

Use the DM-30 engine decontaminant as a preventive measure in gas engines and in diesel engines.

TECHNICAL DATA SHEET   safety data sheet

Directions for Use

For Cars, Small Trucks and Boats:
Add 250 ml of DM-30 to old oil and let the engine idle for a maximum of 10 minutes. Then, drain out the oil, replace oil filter and add new oil.

For Heavy Diesel Trucks:
Add 5% of DM-30, up to a maximum of 1 L, to the old oil and let the engine idle for a maximum of 10 minutes. Then, drain out the oil, replace oil filter and add new oil.

Notes

For optimal engine performance, add the following Prolab antifriction treatments to the new oil: TMA-99 for car engines and the TMI-369 for heavy truck engines.

Available Sizes

250 ml

Product Code

# 399

Characteristics ASTM Test Typical Values
Flash Point D92 140°C
Specific Gravity at 15°C D4052 0.947/cm3
Viscosity at 40°C D445 19 cSt
Viscosity at 100°C D445 3,6 cSt
Base Index D2896 39 mg KOH/g
Appearance   Brown Transparent Liquid