Monogear
Synthetic lubricant for gearboxes
Description
PROLAB's MONOGEAR is a uniquely formulated EP synthetic oil for gearboxes with a PAO base and PROLAB's antifriction treatment providing it with exceptional properties which allow it to outclass similar products.
Characteristics and Benefits
PROLAB's MONOGEAR synthetic oil for gearboxes is the result of an innovative formulation which contains a unique antifriction treatment as well as superior quality adherent polymers to ensure longer-lasting efficiency as well as second-to-none reliability under heavy loads and extreme working conditions.
MONOGEAR protects gears against wear caused by friction by covering metal surfaces of bearings, pinions and crankcases with a lubricant coating thus providing power transfer integrity, a much smoother operating mode and greater reliability and efficiency by accelerating the progression speed of the lubricant through gears at start-up time.
PROLAB's PAO based MONOGEAR has built-in superior anti-foaming properties and offers maximum protection against oxidation and corrosion. It is available in 5 ISO grades: 150, 220, 320, 460 and 680.
Normes
Monogear series meet and surpass the following normes:
- SAE J2360
- MIL-PRF-2105E
- API MT-1
- API GL-5
- Mack GO-J
- Scania STO 1:0
- ZF TE-ML 05A, 07A, 16B/C/D, 17B, 19B
- Arvin Meritor 0-76-A/B/D
- DAF (where GL-5 axle lubricants are recommended for use)
- IVECO (WHERE MIL-PRF-2105E AXLE LUBRICANTS ARE RECOMMENDED FOR USE)
- Renault (where GL-5 or MIL-PRF-2105E axle lubricants are recommended for use)
- MAN 342 M-2
Types of Application
Use PROLAB's MONOGEAR synthetic oil in all types of gearboxes working with heavy loads.
TECHNICAL DATA SHEET SAFETY DATA SHEET grade 150 SAFETY DATA SHEET grade 220 SAFETY DATA SHEET grade 320 SAFETY DATA SHEET grade 460 SAFETY DATA SHEET grade 680
Compatibilities
PROLAB's MONOGEAR is compatible with elastomeric seals.
Directions for Use
Follow the manufacturer's instructions for the lubrication of the specific piece of equipment.
Notes
For better results, it is highly recommended to use PROLAB's DE-25 Decontaminant prior to using a new lubricant.
Warning
The MONOGEAR synthetic oil for gearboxes can be incompatible with some yellow metals (copper-zinc alloy, copper, etc.) depending on operating temperatures.
Do not hesitate to consult your PROLAB representative.
Available Sizes
4 L, 20 L, 55 L, 205 L
Product Code
# 406: MONOGEAR # 150
# 536: MONOGEAR # 220
# 535: MONOGEAR # 320
# 534: MONOGEAR # 460
# 533: MONOGEAR # 680
| Characteristics | ASTM test | Typical Values Monogear 150 | Typical Values Monogear 220 | Typical Values Monogear 320 |
|---|---|---|---|---|
| Flash Point | D92 | 226°C | 226°C | 224°C |
| Fire Point | D92 | 238°C | 232°C | 246°C |
| Pour Point | D97 | -30°C | -22°C | -13°C |
| Specific Gravity at 15°C | D4052 | 0,89 g/cm3 | 0,89 g/cm3 | 0,89 g/cm3 |
| Viscosity at 40°C | D445 | 146cSt | 222 cSt | 334 cSt |
| Viscosity at 100°C | D445 | 16 cSt | 21 cSt | 28 cSt |
| Viscosity Index | D2270 | 110 | 110 | 110 |
|
Rust Preventive - Distilled Water - Sea Water |
D665 |
Pass Pass |
Pass Pass |
Pass Pass |
|
Foaming Stability - Sequence #1 - Sequence #2 - Sequence #3 |
D892 |
0/0 ml 10/0 ml 0/0 ml |
10/0 ml 0/0 ml 10/0 ml |
20/0 ml 0/0 ml 10/0 ml |
|
Demulsibility - Water in Oil - Total Free Water - Emulsion |
D2711B |
0,6 % 83 ml 0 ml |
0,8 % 86 ml trace |
1,2 % 84 ml 0 ml |
| Dielectric Breakdown | D877 | 32 Kv | n.d. | n.d. |
| 4-Ball Wear | D4172 | 0,35 mm | 0,32 mm | 0,29 mm |
|
4-Ball Wear EP - Load Wear Index - Weld Load |
D2783 |
74 400 kg |
80 400 kg |
80 400 kg |
| Characteristics | ASTM test | Typical Values Monogear 460 | Typical Values monogear 680 |
|---|---|---|---|
| Flash Point | D92 | 236°C | 228°C |
| Fire Point | D92 | 246°C | 240°C |
| Pour Point | D97 | -12°C | -13°C |
| Specific gravity at 15°C | D4052 | 0,90 g/cm3 | 0,90 g/cm3 |
| Viscosity at 40°C | D445 | 440 cSt | 622 cSt |
| Viscosity at 100°C | D445 | 34 cSt | 49 cSt |
| Viscosity Index | D2270 | 113 | 134 |
|
Rust Preventive - Distilled Water - Sea Water |
D665 |
Pass Pass |
Pass Pass |
|
Foaming Stability - Sequence #1 - Sequence #2 - Sequence #3 |
D892 |
0/0 ml 00/0 ml 0/0 ml |
0/0 ml 10/0 ml /0 ml |
|
Demulsibility - Water in Oil - Total Free Water - Emulsion |
D2711B |
1,2 % 85 ml 0 ml |
1,2 % 82 ml 0,6 ml |
| Dielectric Breakdown | D877 | n.d. | n.d. |
| 4-Ball Wear | D4172 | 0,30 mm | 0,31 mm |
|
4-Ball Wear EP - Load Wear Index - Weld Load |
D2783 |
83 400 kg |
85 400 kg |